RAMS for General Builders
Risk assessments and method statements for general builders working on managed and commercial sites.
Strictly Pay-As-You-Go. No consultant fees. No subscriptions.
/ Document
PDF emailed shortly after submission
Consistent RAMS for repeat building tasks
Commercial Site Suitability
Documentation commonly used by general builders on managed and commercial sites
Education
Schools & Universities
Commercial
Offices & Workspaces
Retail
High Street & Centres
Healthcare
Non-Clinical FM
SME Contractors
RAMS that reflect how small teams actually work on live sites.
Subcontractors
Consistent RAMS that align with principal contractor site requirements.
Facilities Managers
Clear RAMS that support planned and reactive maintenance work.
The “Honest RAMS” Promise
The system only supports routine, non-structural building work. Task eligibility is confirmed in under 30 seconds, and out-of-scope work is stopped without charge.
Define the Works
Select the routine building work your team is carrying out, including the type of work, tools, materials, and access methods.
Create Your RAMS
The system uses your declared information to produce hazards, controls, method statements, and PPE that match the refurbishment or repair task.
Receive Your RAMS
Pay £15 on submission. Your compliant RAMS PDF is emailed shortly after submission. No recurring billing.
Clear Paperwork, No Assumptions
Suitable for submission on managed sites.
Below is a real example for a general builder carrying out non-structural building work.
L2 x S5
CONTROL: Knee pads (Type 1 or 2) to be worn. Task rotation or regular rest breaks taken. Work planned to minimise continuous kneeling time.
Why RapidRAMS Works for General Builders on Managed Sites
General builders waste hours correcting and re-submitting RAMS when the paperwork does not match the work on site. RapidRAMS generates documents based on the tasks your team is actually carrying out.
- Matches the Work: Hazards and controls are generated from the building tasks you declare.
- Consistent Output: RAMS are produced to a clear, reliable standard across everyday building work.
- No Overreach: The system covers routine building tasks without extending into specialist or permit-controlled work.
✅ Typical General Builder Work Supported
Routine, non-specialist work commonly carried out by small and medium contractors across supported trades.
- Refurbishment: Joinery, drylining, pointing, and non-structural repairs.
- Access: MEWPS, scaffolding, towers, ladders, podiums.
- Materials: Cement, mortar, plaster, sealants, and expanding foams.
- Sites: Occupied offices, schools, retail units, and residential blocks.
⛔ Strictly Prohibited
RapidRAMS is intentionally limited to routine non-specialist work.
- Asbestos removal or disturbance
- Permit-controlled or specialist operations
- Deep excavations (>1.2m) or confined spaces
- Structural demolition or load-bearing wall removal
Why? These tasks require specialist permits and engineered planning.
Read our full Scope & Disclaimer Policy →
Structured Logic vs Recycled Templates
Why builders use RapidRAMS on managed sites
Reused Word Templates
-
Static text:
Copied from previous jobs with no link to the work actually being carried out. -
No safety controls:
Nothing prevents unsuitable or higher-risk activities being left in by mistake. -
Obvious errors:
Old site addresses, irrelevant hazards, and mismatched controls are easy to spot.
RapidRAMS Generator
-
Logic-driven output:
Hazards and controls are created from the tasks, tools, and site details you declare. -
Hard scope limits:
RAMS are not produced for work that falls outside routine building activities. -
Cleaner review:
Documents are easier to follow and quicker for site teams to assess.
Common Questions from General Builders
Clear answers on pricing, site acceptance, and scope.
Why is it £15? Is this a full RAMS document?
Yes. Each order produces a complete, professional RAMS document, typically 8–10 pages depending on the task.
RapidRAMS is priced at £15 because the document is generated through structured logic rather than manual consultancy time. You are paying for the finished RAMS output, not meetings, travel, or hourly administration.
Will site managers accept these RAMS?
Yes. Site managers regularly accept RapidRAMS documents because they reflect the actual work being planned, rather than generic wording.
Each document includes calculated risk scores, task-specific controls, method statements and a clear audit trail. A unique Trace ID and digital signature show the document was generated using structured logic, not copied from a previous job.
Do I need a subscription or ongoing account?
No. RapidRAMS operates on a pay-as-you-go basis.
You pay £15 per document, only when you need one. There are no subscriptions, recurring fees, or ongoing commitments.
Can I use this for structural work or extensions?
RapidRAMS is designed for routine, non-structural building work such as refurbishments, repairs, and fit-outs.
Structural demolition, deep excavations (greater than 1.2m), asbestos-related work, and other specialist activities are intentionally excluded. If a task falls outside scope, the system stops the process before payment.
How long does it take to receive the PDF?
Most users complete the form in a few minutes.
After submission and payment, the RAMS PDF is generated and emailed shortly after. Delivery depends on system processing and email delivery.
RAMS That Fit the Job.
Job details go in.
A clean, site-ready document comes out.
Not ready to generate RAMS yet?
Explore our Knowledge Hub for guidance on RAMS expectations, site acceptance issues, and common compliance pitfalls.